the right page this page is will guide on how to flash your stock rom
on your Nexus device using Windows Computer very fast with out errors
what so ever.
Requirements: Your Google Nexus device should have at
least 50-70 percent of battery to perform the flashing process this make
the device no to shout down when flashing the stock rom
Read the step twice or more before en-backing on the flashing to avoid any damage on device
Step 1: Download and install USB drivers on your computer.
Step 2: Download for Mac, Windows and install Minimal ADB and fastboot tool on your computer.
Extract the contents of the ADB/Fastboot ZIP file inside a new folder
called ‘google’ on your desktop. Extract and transfer the contents of
the factory image inside this folder as well. The list of files will
include a ZIP file containing the codename of your Android device, two
files with “flash-all” names, and a bootloader image file. All the
extracted contents of the factory image should be inside the same folder
as the ADB and Fastboot file, otherwise you will get a file not found
Step 3: Download the Google Nexus Stock ROM for your Nexus device.
After You done Downloading your device Rom, create a folder on your
desktop and extract the file into the folder your created on your
compute. After extracting you will to see the following files:
Step 5: Enable the USB Debugging on your Nexus Device. To do that go to Open Settings & then Developers Option & look for USB Debugging in the option listed & Tick to enable you are good.
(Developers Option is hidden for Android 4.2.2 or above, to show this option Go to Settings & About Phone > Built Number (Tap on it for 5-8 times).
Step 6: Put, your device Nexus Device Power off.
Step 7: Boot your device into the ADB mode. To do that press and hold Volume Up + Volume Down + Power for 7-10 seconds until adb mode is enabled.
Step 8: After the above, Connect your Device to the computer using the good data cable.
Step 9: Now, you need to unlock the bootloader (it can be locked later). To unlock the bootloader, Open MAF32.exe or py_cmd.exe from the Minimal ADB and fastboot folder (C:Program FilesMinimal ADB and Fastboot).
Step 10: Once, Command Window is launched, Give the following command: fastboot oem unlock
Step 11: Now, you will be able to see warning message on your device screen, Using your Volume UP button Select Yes to Continue.
Step 12: Your device bootloader is unlocked you can now flash the firmware to your device.
To flash the firmware, Go to the extracted files and open flash-all.bat
Step 13: Now, flashing process will begin, and it will hardly take 5-10 minutes to complete.
Step 14: To lock the bootloader again, Open py_cmd.exe from the Minimal ADB and fastboot folder (C:Program FilesMinimal ADB and Fastboot). And give the following command: fastboot oem lock
Tecno Phantom 9 is on its way
Just in case you still haven’t heard, Tecno Mobile posted a teaser of their next addition to the phantom series. This was posted on their Facebook page about last week Tuesday.
The phantom series is considered to be Tecno’s top innovations, their flagship lineup. Always incorporated with the best hardware & features from the Chinese company. The phantom 9 seems to be following the same sequence.
From the teaser, we supposedly got a few hints (not sure if this is the right word) of what to expect before it is finally revealed. And it has a couple of impressive specs I’d say.
Here are the following specifications from the teaser;
• 6.4 inch Full view AMOLED display
• Android 9 – the latest android version
• In-display Fingerprint sensor
• 6GB RAM + 128GB ROM
• AI triple camera with dual front flashlight
• 3500mAh battery
I think Tecno needs to be reminded of what a teaser mean, because at this point, you’ll have to wonder how this is a teaser. Permit me to called it a spoiler instead.
What else do they have in store? They literally listed every spec we care about in a smartphone today. Well, only time will tell.
iPhone 11 – Is there anything left to announce?
It is still months before Apple unveil their next iPhone, but that has not done enough to avert the ton of leaks online.
The release for the iPhone 11 is set for September this year. Apart from the aesthetics and designs, not much is known about its specifications.
Although there have also been rumors of the iPhone 11 spec sheet, history has severally proven those type of speculations to be unreliable.
Here are the leaked photos. What do you think?